CNC frezeyi kullanacak öğrencilerin VisualMill kullanımı ile CNC frezenin işleyebileceği malzemeler ve temizlik konularında temel eğitim almış olmaları gerekir. CNC freze sadece tekniker tarafından kullanılır. Makine çalışırken bulunduğu odaya girilmez. Öğrencilerin randevu almadan önce Visual Mill yazılımı ile modellerini test etmeleri ve ne kadar süre tutacağını tespit ettikten sonra randevu almaları gerekir. CNC freze ile işlenebilecek malzemeler: ahşap, akrilik, PVC, köpük, MDF, fiberglas, ve lexan. Malzemeler için önceden teknisyenden onay alınmalıdır.

BU SİSTEM ÖĞRENCİLERİN BİRE-BİR KULLANIMINA KAPALIDIR: Hiçbir zaman teknisyen olmadan CNC frezeyi kullanma. Sistem çalışmaya başladığında bulunduğu odadan çık. Hiçbir zaman makine dışarıdan gözetim altında olmadan kendiliğinden çalışmaya bırakılmaz.
MASKE VE KORUYUCU GÖZLÜK TAKILMALIDIR: Kesim işlemi sırasında çıkan talaş parçaları gözler ve ciğerler için tehlikeli olabilir. Koruyucu gözlük ve maske takılmadan CNC’nin bulunduğu odaya girilmez.
KESİLEN MALZEMELERE DİKKAT ET: Çalışılacak malzemenin önceden düzgün biçimde sabitlenmesi gerekebilir. Malzemenin üzerinde çivi, vida vb. bulunmamalıdır. Teknisyenden çalışma öncesinde yardım iste.
SİSTEMİN ELEKTRONİK BÖLÜMLERİNDE TEHLİKELİ VOLTAJ VARDIR: Bu bölümlere normal kullanımda ulaşmaya gerek yoktur. Ancak bakım nedeniyle ulaşılması gerekirse öncelikle cihazın şebeke elektrik bağlantısı kapatılmalıdır.

 

GENEL KURALLAR:

  • Öğrencilerin kullanmayı bilmedikleri araç-gereçlerle, idari personelin gözetimi dışında veya herhangi bir risk yaratacak şekilde çalışmaları yasaktır. 
  • Dijital dosyalar randevu almadan önce hazırlanmalı ve ne kadar işlem süresi çıkartacağı test edilmelidir.
  • Öğrenciler, randevu saatinde lab.’da bulunmakla ve randevu bitiminde de lab.’dan çıkmakla sorumludur.
  • Öğrenciler, çalıştıkları esnada lab.’ı temiz tutmakla ve temiz olarak teslim etmekle sorumludur.
  • Kurallara uymayan öğrencilerin lab.’ı kullanma izinleri iptal edilir.
  • Laboratuvar randevu saatleri içerisinde kullanılan araç ve gereçlerin maddi sorumluluğu randevu alan kişiye aittir

Students using the CNC router should have basic trainings on Visual Mill, and the materials that can be procesed. CNC router can only be operated by the technician. Students are not allowed in while the machine is operating. Students should test the duration of operation BEFORE applying for an appointment. Materials that can be processed by the CNC router are: wood, acrylic, PVC, foam, MDF, fiberglass and lexan. Technician’s approval is necessary before working with a material.

THIS SYSTEM IS CLOSED TO STUDENTS’ OPERATION: Never use the cnc router without technician. Leave the room when it starts. Never leave the working system alone.

PROTECTIVE GOGGLES AND MASKS SHOULD BE WORN: CNC operation may produce sawdust which is very dangerous for eyes and lungs. Protective goggles and masks should be worn when you enter the room.

BE CAREFUL ABOUT THE MATERIALS: Materials to be processed might need to be fixed to the cutting plate before operation. Never leave screws or nails on it. Ask for technician’s help.
DANGEROUS VOLTAGES ARE PRESENT WITHIN THE ELECTRONICS ENCLOSURES OF THIS SYSTEM: Access to these areas is not necessary during normal operation. If it becomes necessary to open one of these enclosures for service reasons, disconnect the power cord from electrical supply.

 

GENERAL RULES:

  • Students are not allowed to work with machinery they don’t have training, without the supervision of a technician, or causing any risks
  • Digital files should be prepared and tested for determining the required time, before an appointment is taken.
  • Students are responsible of being at the lab. at exact time of their appointment and leaving the lab. when their appointment is finished.
  • Students are responsible of keeping lab. area clean while they are working and leaving.
  • Student’s permissions will be cancelled who fail to comply with lab. rules.
  • Applicant accepts the pecuniary liability of the tools and the equipments used in the laboratory.